It is necessary to go through the following points point by point:

[shapanwwuom]

When connecting a microwave oven to a two-wire circuit, its case contains an electrical connection that has ground contacts. It is produced from the power cord plug. Subsequently, it is finally broken. The case potential completely departs from the grounding system. But, at the same time, it is connected to the filter's midpoint, which is created additionally.

The scientific approach to producing a grounding circuit for connecting it to household appliances is quite labor-intensive.This is especially difficult sometimes when it comes to installation in Stalin-era multi-story buildings. To overcome this obstacle, the following rules should be followed:

give clear instructions to all household members that they must not touch the microwave and grounded metal objects at the same time;
Only dielectric coatings that are resistant to voltage israel telegram data drops should be used on the floor;
Do not allow small family members near the electrical appliance;
apply all possible protective measures to ensure continuous uninterrupted security.
Repair should begin with preparation: necessary actions before disassembling the microwave oven body
After completing the mandatory safety briefing,

Prepare a work area, equip it with all necessary tools and protective equipment.
Study thoroughly the documentation concerning the technical part of the equipment.
Inspect the microwave for external defects.
It is imperative to have an idea of ​​how kinematic units work and the rules for constructing electrical connections. As tools, you will need a screwdriver and a special universal measuring device - a multimeter. In extreme cases, you will also need a soldering iron. After diagnosing the microwave, it will already be clear which parts will need to be replaced.

Before repair, first carefully study the operating instructions for the particular furnace that is being tested. Reliable instructions will help avoid injuries and other troubles. In addition, each individual manufacturer has its own nuances and subtleties in the design elements of the equipment. But they, as a rule, do not differ much from each other. Nevertheless, it is simply necessary to know the basics to ensure reliable and safe operation.