As we promised, here is a list of frequently encountered faults:
Posted: Wed Feb 19, 2025 4:00 am
In most cases, you can get by with a Phillips screwdriver and a multimeter. In some cases, you may also need a soldering iron. Accordingly, you will also need spare parts, which ones will be clear after diagnostics.
No response to the power button.
The device does not turn off after the mode has been completed.
Weak heating.
No heating.
Sparking is observed.
The tray does not rotate.
No response to control panel.
The display does not work when turned on.
When the door is closed, the fuse blows.
Before we consider in detail how to eliminate the belgium telegram data listed faults, we consider it necessary to warn that before diagnostics and repairs it is necessary to physically disconnect the device from the power supply, that is, pull the plug out of the socket.
In this case, diagnostics and repairs must follow the following algorithm of actions:
We check for voltage in the power supply network. If there is none, we solve the problem with the power source, otherwise we move on to the next step.
We check the control module power supply. We start with the fuse. If it is burnt out, we replace it. After that, we turn on the device and try to heat, for example, a glass of water. If everything works, the repair is complete. If the fuse burns out, the problem is in the control module, it should be repaired or replaced.
In order to repair the control module yourself, you need to have certain skills in radio electronics; without them, it is not recommended to start repairing the control module yourself.
Example of fuse location on control module
In most cases, this problem indicates a malfunction of the door position microswitch. To fix the problem, we find, check and, if necessary, replace the switch.
No response to the power button.
The device does not turn off after the mode has been completed.
Weak heating.
No heating.
Sparking is observed.
The tray does not rotate.
No response to control panel.
The display does not work when turned on.
When the door is closed, the fuse blows.
Before we consider in detail how to eliminate the belgium telegram data listed faults, we consider it necessary to warn that before diagnostics and repairs it is necessary to physically disconnect the device from the power supply, that is, pull the plug out of the socket.
In this case, diagnostics and repairs must follow the following algorithm of actions:
We check for voltage in the power supply network. If there is none, we solve the problem with the power source, otherwise we move on to the next step.
We check the control module power supply. We start with the fuse. If it is burnt out, we replace it. After that, we turn on the device and try to heat, for example, a glass of water. If everything works, the repair is complete. If the fuse burns out, the problem is in the control module, it should be repaired or replaced.
In order to repair the control module yourself, you need to have certain skills in radio electronics; without them, it is not recommended to start repairing the control module yourself.
Example of fuse location on control module
In most cases, this problem indicates a malfunction of the door position microswitch. To fix the problem, we find, check and, if necessary, replace the switch.